| Activation Switches | Transmitters and Receivers | Wireless Packages |
| Duration Timers | Infrared and Microwave Sensors | Data and Instruction sheets |
The SafePath D38 with patented Human Presence Radar (HPR) is the latest advancement in microwave motion detection for automatic doors. It is the only microwave detector that provides protection for a person who enters the door activation zone and then slows to an extremely slow pace or stops. The D38 can provide this extra level of protection because HPR allows it to actually detect two separate rates of motion simultaneously.
The DH100 is a combination 2-row motion, 3-row presence sensor designed to provide both activation and safety protection for automatic sliding doors in a single device.
The DH100 is based upon the most reliable active infrared technology available—Floor Reflection Method (FRM). With FRM up to 40 individual detection zones (floor points) are precisely reflected off of the floor in a rectangular pattern meeting and exceeding ANSI/BHMA A156.10 guidelines.
The DH100 provides motion detection as far as 7 feet (2.2m) from the door while providing a dense zone of presence detection in close to the door.
The ID20 is a microwave motion detector designed to trigger the operation of an automatic industrial door. The main advantage of the ID20 over other available motion detectors is that it responds to traffic in only one direction. When used in doorways with two-way traffic, the ID20 allows the door to close sooner by sensing only approaching traffic, providing more efficient and economical door operation. The ID20 generates a very low power microwave beam aimed to cover the same area normally covered by loop detectors. It is less expensive to install and less susceptible to damage and malfunction from ice, salt and heavy vehicular traffic.
The DH17i is an active infrared motion and presence detector designed for use in high-mount applications. The DH17i can activate industrial automatic doors and provide presence detection as well. With an adjustable sensing area made up of 24 detection zones, the DH17i provides a precise and dense pattern of coverage. (fast roll and industrial doors)
The DH97 is a 4-row active infrared presence detector designed for safety applications. Whether using it for swinging, sliding, folding or revolving doors, the DH97 is compatible with any manufacturer's operator or relay lockout.
Provides safety protection for automatic pedestrian sliding doors with shallow approaches. Four rows of 32 individual detection zones provides a dense safety pattern. You can adjust the pattern width and depth.
The DH98i is an active infrared motion and presence detector which can be mounted up to 13 feet (4m) off the floor. The DH98i serves two purposes. First, it is designed to activate industrial automatic doors. Second, it provides presence detection near these types of automatic doors.
AccuGuard BP2 infrared modular beam system consists of one control module, two transmitter beams with cables and two receiver beams with cables.
Same as above with 4 surface mount boxes.
